Blower Assembly - Passenger Side
Blower Assembly - Passenger Side1. Disconnect battery ground cable and remove dash liner and console side casing.
2. Remove glove box liner and take out nuts holding mounting plate to blower assembly and lower plate. Pull the plate clear.
3. Disconnect sensor hose from blower assembly duct, the pliable duct from side of air conditioner, the blower harness at block connector and the vacuum line from valve on blower assembly.
4. Wedge open recirculation valve in base of blower assembly and remove bolts securing blower assembly to mounting brackets.
5. Ease blower assembly from position and detach the duct by removing tape.