Demist Flap Assembly
Demist-Flap AssemblyLeft or Right Side
- Disconnect battery earth lead.
- Remove applicable dash liners and closing panels.
- Remove the steering wheel.
- Remove the glove box lid and glove box.
- Remove the fascia center veneer panel and center vent outlet.
- Remove the fascia assembly for access.
- Remove the solar/alarm sensor assembly.
- With the fascia assembly on a bench, remove demist grille, duct/flap assembly securing screws, as required.
- Invert the fascia for access.
- Remove the actuator vacuum pipe and remove the demist duct as required.
NOTE: Installation is the reverse of this procedure.