Remove
Remove- Drive the vehicle onto the ramp. Raise the ramp.
- Remove the nut, bolt and washer from the clamping ring (downpipe catalytic converter to underfloor pipe).
- Open the clamp if necessary and slide it onto the underfloor pipe.
Exhaust Pipe Clamps:
- Loosen the nut (1) from each of the clamping, rings (underfloor catalytic converters to rear silencer sections). Ease open the clamps (2) if necessary.
- Remove the mounting rubber (3) which sup ports the rear of the underfloor catalytic converter to the crossmember.
- Carefully separate the underfloor catalytic converter/pipe assembly from the down pipe assembly.
- Carefully separate the underfloor catalytic converter/pipe assembly from the rear silencer assemblies and place aside.
- Remove the olive and the clamp from the underfloor pipe front joint.