Canister Purge Control Valve: Service and Repair

Purge Control Valve:

The purge control valve is fitted in the line of the vacuum hose between the charcoal canister and the engine.
- Jack up the front of the vehicle and support on one stand.
- Remove the left hand front road wheel.
- Remove the under arch access cover
- Reposition Tank Pressure Control Valve to charcoal canister hose securing clip, disconnect hose from canister.
- Reposition Tank Pressure Control Valve/hose assembly for access.
- Reposition EVAPP hose/canister securing clip and remove hose from canister.
- Reposition clip and remove hose from valve.
- Disconnect harness/EVAPP multiplug.
- Reposition engine purge hose to EVAPP securing clip and disconnect hose from EVAPP Remove EVAPP
- Fitting a new EVAPP is the reverse of the above procedure.