Tank Pressure Control Valve

CAUTION: The vacuum/pressure relief valve must be properly installed or the fuel tank may collapse.

For correct orientation, the valve has "Tank" inscribed on one fitting and "Can" or "Engine" on the other.

EVAP System Components:

Tank Pressure Control Valve:

- Jack up the front of the vehicle and support on one stand.
- Remove the left hand front road wheel.
- Remove the under arch access cover.
- Reposition Tank Pressure Control Valve hose to canister securing clip and remove hose from canister.
- Reposition hose to valve securing clip and disconnect hose.
- Reposition vapor pipe to valve hose securing clip and disconnect hose.
- Disconnect inlet manifold vacuum to Tank Pressure Control Valve hose and remove valve.
- Fitting a new Tank Pressure Control Valve is the reverse of the above procedure.