Differential Assembly: Specifications

Differential strut to top bracket 80-100 Nm
Differential strut top bracket to body 45-55 Nm
Differential strut to wishbone tie 85-105 Nm
Drive shaft to differential 78-95 Nm
Frame centre boss 92-112 Nm
Frame outer bracket 92-110 Nm
Frame to rear mounting 92-112 Nm
Front mounting to axle carrier 22-28 Nm
Fuel feed hose to pump (clip) 2.2-2.5 Nm
Fuel pump feed hose to pump (union) 10-12 Nm
Fuel pump mounting bracket to axle carrier 7-10 Nm
Lower mounting bracket to body 40-50 Nm
Mounting bracket to drive unit 45-55 Nm
Oil seal housing to differential 51-58 Nm
Output shaft to differential 78-95 Nm
Pendulum to differential mounting stud 160-200 Nm
Propeller shaft to differential 95-105 Nm
Rear brake caliper to carrier 31-40 Nm
Road speed sensor mounting bracket 22-28 Nm
Road speed sensor to mounting bracket 7-8 Nm
Spring and damper to wishbone 160-200 Nm
Stud differential nose 47-57 Nm
Upper link mounting 92-112 Nm
Wheel nut to wheel stud (steel wheel) 65-85 Nm
Wheel nut to wheel stud (alloy wheel) 85-102 Nm
Wishbone to drive unit 85-105 Nm
Propeller shaft to drive flange 95-105 Nm