Console: Service and Repair

1. Disconnect battery ground cable.
2. On models with rear console extension, remove rear extension finisher, rear extension veneer and the rear extension.
3. On all models, remove console ashtray, console finisher and console veneer.
4. Remove radio console, fascia center veneer and fascia center vent outlet.

Center Replacement:

5. Remove forward console securing screws (1), Fig. 4.
6. Disconnect seat switch harness connector, then move rear air distribution box for access.
7. Disconnect cigar lighter connector, then remove rear air distribution box.
8. Disconnect security switch connector, then remove rear console securing screw (2), Fig. 4.
9. Disconnect console fuse box harness connector, then remove center console assembly.
10. Reverse procedure to install.