Instrument Printed Circuit

INSTRUMENT PRINTED CIRCUIT

Fig 1:

Fig 2:

RENEW

Disconnect the battery earth lead. Position the tilt steering column to the lowest position.

Remove the instrument panel finishers' securing screws and remove the central and side finishers (1 Fig. 1).

Remove the instrument panel to fascia securing screw cover plates and remove the screws securing the instrument panel to the fascia (2 Fig. 1).

Ease the instrument panel foward for access and disconnect the multiplugs.

Remove the instrument panel.

Note: To minimize the risk of damage and contamination, all repairs conducted on the Instrument Pack should be performed in a non-static dust free environment.

Place a protective cover on a workbench and position the instrument panel down onto the cover.

Remove the panel illumination bulbs (1 Fig. 2).

Remove the printed circuit securing nut rubber covers.

Remove the printed circuit to instrument panel securing nuts and remove the printed circu it from the instrument panel (2 Fig. 2).

Carefully fit the new printed circuit to the instrument panel and secure the nuts.

Refit the printed circuit securing nut rubber covers.

Note: Ensure the printed circuits are not torn or deformed.

Fit the panel illumination bulbs.

Refit the instrument panel assembly to the vehicle.

Reconnect the battery earth lead.