Fuel Tank Evaporative Loss Flange

NOTE: Operations within fuel tank assembly must only be performed with use of screwdriver JD 175.

REPLACEMENT

- Remove the fuel tank assembly.





- Release clip and disconnect breather hose from the evaporative loss flange.
- Using tool JD 174, displace and remove the evaporative loss flange retaining ring.
- Reposition the flange for access to the fuel pump harness multi-plug, disconnect the multi-plug.
- Fit and seat new evaporative flange seal.
- Connect evaporative loss flange to pump multi-plug.
- Seat evaporative loss flange to seal.
- Using tool JD 174 secure flange with retaining ring.
- Connect and secure breather hose to flange stub pipe.
- Reposition the tank assembly to the vehicle.
- Refit the tank by reversing the removal operations.
- Ensure new O-rings and seals are fitted.
- Ensure all electrical connections are clean and secure.
- Check all flange, hose and pipe connections for security and signs of leakage.