Transmission Adapter Plate

Engine Rear / Transmission Adapter Plate, Renew

Remove the engine flywheel (Manual), or the engine drive-plate (Automatic). Remove the lower bolt securing the starter motor and reposition the starter motor away from the adapter plate.

- Remove the adapter plate securing bolts and remove the adapter plate.

- Remove the dowel pegs and blanking plugs from the adapter plate.

- Discard the adapter plate.

- Fit the blanking plugs and dowel pegs to the new adapter plate.

- Fit the assembly to the rear of the engine and torque tighten the securing bolts.

- Re-position the starter motor to the adapter plate and secure with the lower bolt.

- Refit the engine flywheel (Manual), or the engine drive-plate (Automatic).