Wheel Speed Sensor: Service and Repair

Rear Wheel Speed Sensor

Removal

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
2. Remove the LH rear wheel and tire.
3. Remove the wheel speed sensor.

> Remove the bolt.
> Disconnect the electrical connector.





Installation
1. Install the wheel speed sensor.

> Clean the component mating faces.
> Connect and secure the electrical connector.
> Install the bolt and tighten to 10 Nm (7 lb.ft).

2. Install the wheel and tire.