90000 MI or 144000 KM

Lubricate
    Wheel Hub (Locking)
    Steering
      Inspect seals & components. Lubricate ball joints.
    Drive/Propeller Shaft
Clean
    Carburetor
      Clean choke system
Check
    Ignition Timing
    Ignition Cable
    EFE Valve
      Check and clean heat riser.
    Distributor Advance Unit
    Brakes and Traction Control
      Inspect front & rear linings, master cylinder, calipers, wheel cylinders. Check general condition of system. Inspect front & rear linings, master cylinder, calipers, wheel cylinders. Check general condition of system.
Inspect
    Vacuum Harness HVAC
      Inspect vacuum hoses and connections. inspect vacuum hoses and connections
    Thermostatic Air Cleaner
    Steering Gear
      Check fluid on manual steering gear.
    Parking Brake Lever
      Check & adjust parking brake freeplay.
    Ignition Rotor
    Idle Speed
      Inspect and adjust.
    Fuel Delivery and Air Induction
      Inspect filler cap, tank, lines, hoses & connections.
    Exhaust System
    Drive Belt
      Check & adjust drive belts.
    Distributor Cap
    Clutch, M/T
    Clutch Pedal Assembly
      Check & adjust clutch pedal freeplay.
    Clutch Linkage
    Body and Frame
      Inspect steering gear & linkage, springs, shocks, tires. Check overall steering & suspension condition. Lubricate hinges, door latches, slides and locks.
    Battery
      Check fluid level. Clean terminals, check tiedowns, and voltage.
Replace
    Spark Plug
    Positive Crankcase Ventilation Valve
      Clean filter
    Positive Crankcase Ventilation
      Replace PCV valve, clean or replace filter.
    Oil Filter, Engine
    Fuel Filter
    Fluid - Transfer Case
    Fluid - M/T
    Fluid - Differential
      Change lubricant. front & rear
    Fluid - A/T
      Change fluid & filter Change fluid and filter.
    Evaporative Canister Filter
    Engine Oil
      If your mileage is less than 7,500 miles (12,000 km) yearly, replace the engine oil filter at each oil change.
    Air Filter Element
Clean/Repack
    Wheel Bearing
      Clean & repack front wheel bearings. Replace spindle oil & bearing seals.
Service or Charge
    Manual Transmission/Transaxle
      Change lubricant.
Flush
    Cooling System
      Change engine coolant.
    Choke Housing
      Clean choke system.