Transmission Cover Components Disassembly

Disassembly - Transmission Cover Components

Place the selector arm plates (36) and shift rail (37) in a neutral position (centered).

Rotate the shift rail (37) counterclockwise until the selector arm (38) disengages from the selector arm plates (36) and the selector arm roll pin (38) is accessible.

Pull the shift rail (37) rearward until the selector arm (38) contacts the first-second gear shift fork (39).





Remove the selector arm roll pin (38) with a 5-mm (3/16-in.) diameter pin punch and remove the shift rail (37).

Remove the shift forks (39 and 40), selector arm plates (36), selector arm, roll pin, and interlock plate (38).





Remove the shift rail oil seal (41) and 0-ring (42) with a pry tool.

Remove the shift rail plug (43) with a hammer and punch.

Remove the nylon inserts (44) and selector arm plates (45) from the shift forks (46). Note the position of the inserts and plates for assembly reference.