With Overhead Console

(1) Remove screw forward of the compass unit.

(2) Flex housing outward while pressing upward to disengage the housing from the rear bracket (arrow 1).

(3) Slide console rearward until the console detaches from the front mounting bracket (arrow 2).





(4) While still pressing upwards on the rear of the console (arrow 1), slide the console forward holding the front of the console away from the headliner (arrow 2 until the rear of the console detaches from the headliner and becomes free.





(5) Disconnect wire harnesses from keyless entry and compass.





(6) Pinch forward area of receiver cover and release clips. Slide cover out from under rib.

(7) Remove the screw and the printed circuit board can be removed.





(8) Inspect the printed circuit board for the code number (key) for the correct replacement transmitter.

(9) To install the overhead console, reverse the removal procedures. Be sure to flex housing outward near the keyless entry receiver until the console snaps onto the rear mounting bracket.