Wheel Tightening Sequence

Always tighten wheel lug nuts in a crisscross pattern with the specified torque.






INSPECTION

The wheels should be inspected on a frequent basis. Replace any wheel that is cracked, is bent, is severely dented, has excessive "runout" or has broken welds. The tire inflation valve should also be inspected frequently for wear, leakage, cuts and looseness. The valve should be replaced if defective or its condition is doubtful.

Clean the wheels with a mild soap and water solution only and rinse thoroughly with water. Never use abrasive or caustic materials, especially on aluminum or chrome-plated wheels because the surface will be etched or the plating severely damaged. After cleaning aluminum or chrome-plated wheels, apply a coating of protective wax to preserve the finish and the lustre