Instrument Cluster / Carrier: Service and Repair

Fig. 33 Exploded view of gauge cluster assembly. Wrangler:

SPEEDOMETER & TACHOMETER CLUSTER

1. Disconnect battery ground cable.
2. Remove instrument panel shroud attaching screws.
3. Slide shroud outward toward steering wheel, then apply upward pressure to bottom shroud and downward pressure to upper shroud to release retaining tabs.
4. If speedometer is to be removed, remove two speedometer to instrument panel attaching screws. Pull speedometer slightly outward, then disconnect speedometer cable and remove speedometer.
5. If tachometer is to be removed, remove two tachometer to instrument panel attaching screws. Pull tachometer slightly outward, then disconnect electrical connector and remove tachometer.
6. Reverse procedure to install.

GAUGE CLUSTER

1. Disconnect battery ground cable.
2. Remove six instrument cluster bezel attaching screw, then remove bezel.
3. Remove six instrument cluster to instrument panel attaching screws, then pull cluster outward to gain access to electrical connector.
4. Disconnect electrical connector and remove gauge cluster.
5. Reverse procedure to install.