Clutch Fluid

CLUTCH FLUID

Clutch system fluid level is checked at the clutch cylinder (Fig. 3). Fluid level is indicated by the MAX and MJN indicators on the cylinder reservoir. Check and top off fluid level to the MAX mark. Do not allow level to fall below the MJN mark.

The only fluid recommended for use in the clutch hydraulic system is Mopar Brake Fluid, or equivalent marked SAE J-1703 or DOT 3. Do not use any any other type of fluid.

Never use reclaimed brake fluid or fluid from an unsealed container. In addition, do not use fluid from a container that has been opened and allowed to stand for any length of time. Moisture in the air can be absorbed by the fluid causing dilution and loss of effectiveness.