Removal

1. Remove release bearing, release lever and release fork from clutch housing. Then remove clutch housing from transmission.





2. Remove backup light switch. Then remove drain plug and drain transmission lubricant into pan.





3. Remove shift tower bolts and remove tower from adapter housing.
4. Remove gasket/slinger from shift tower.





5. Remove shift arm retainer bolt.





6. Loosen and remove restrictor pins.





7. Remove shift arm shaft plug.





8. Remove shift arm shaft with large magnet.





9. Remove shift arm.





10. Remove plug for reverse shift head lock ball. Plug is at right side of adapter housing near backup light switch.





11. Remove lock ball spring with pencil magnet





12. Remove shift head lock ball with pencil magnet.





13. Remove adapter housing bolts.





14. Loosen adapter housing with rubber mallet.





15. Remove housing after loosening it.





16. Remove adapter housing oil seal with a pry tool.