Left Hand Drive

Three fuses supply power for the Anti-Lock Brake System (ABS); fuses 8 and 10 in the PDC and fuse 7 in the fuse block. Fuses 8 and 10 in the Power Distribution Center (PDC) are connected directly to battery voltage and are HOT all times. Fuse 7 is HOT when the ignition switch is the RUN position.

In the RUN position, the ignition switch connects circuit A1 from fuse 6 in the PDC with circuit A38. Circuit A38 connects to a bus bar in the fuse block. The bus bar feeds circuit B236 through fuse 13. Fuse 7 is a 2 Amp fuse.

Circuit B236 connects to the coil side of the ABS power relay and cavity 53 of the ABS control module.

Circuit Z1 provides ground for the ABS control module. Circuit Z1 connects to cavities 1 and 19 of the ABS control module.