Disassembly

1. Drain transmission lubricant, if necessary.
2. Remove release bearing and lever.





3. Remove clutch housing bolts and remove housing.
4. Remove vehicle speed sensor and speedometer adapter, if necessary.
5. Remove bolts holding shift tower to transmission case.





6. Remove shift tower from transmission case.





7. Remove shift tower gasket from shift tower or transmission case.





8. Remove detent ball plug.








9. Remove detent spring and ball with pencil magnet.





10. Remove shift arm retainer bolt.





11. Remove shift arm restrictor pins.





12. Remove shift lever shaft plug.





13. Remove shifter shaft with large magnet.
14. Remove the shift arm from the adapter housing.





15. Remove adapter/extension housing bolts.





16. Loosen adapter/extension housing by tapping it loose with plastic mallet.





17. Remove adapter/extension housing.
18. Remove the bolts holding the front bearing retainer to the transmission case.





19. Remove the bearing retainer from transmission case.





20. Remove input shaft bearing snap-ring.





21. Remove countershaft rear bearing snap-ring.





22. Separate intermediate plate and transmission case by tapping them loose with plastic mallet.





23. Separate the intermediate plate from the transmission case.