Tail Lamp: Service and Repair

REMOVAL
1. Open the liftgate.

Tail Lamp:

2. Remove the bolts attaching the tail lamp housing to the quarter panel.
3. Grasp the lamp and pull to disengage it from the grommet at the base of the lamp.
4. Rotate the bulb sockets one-third turn and remove the bulb sockets from the lamp housing.

INSTALLATION
1. Install the bulb and sockets in the lamp housing.
2. Position the lamp housing in the quarter panel and push to engage the grommet.
3. Install the lamp housing screws. Tighten the screws securely
4. Install the bolts attaching the tail lamp housing to the quarter panel.
5. Close the liftgate.