Grab Handle Bezel

WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIRBAG AND SEAT BELTS/AIR BAGS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the grab handle from the instrument panel. Grab Handle
3. Remove the glove box latch striker from the instrument panel. Service and Repair

Instrument Panel Grab Handle Bezel Remove/Install:

4. Remove the two screws that secure the grab handle bezel to the instrument panel.
5. Remove the grab handle bezel from the instrument panel.

INSTALLATION
1. Position the grab handle bezel onto the instrument panel.
2. Install and tighten the two screws that secure the grab handle bezel to the instrument panel. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Install the glove box latch striker onto the instrument panel. Service and Repair
4. Install the grab handle onto the instrument panel. Grab Handle
5. Reconnect the battery negative cable.