Operation CHARM: Car repair manuals for everyone.

Acceleration/Deceleration Sensor: Service and Repair

REMOVAL
1. From the drivers side, lift carpet back from in front of the console/shifter.
2. Disconnect harness for switch.

Acceleration Switch:





3. Remove mounting bolts and remove switch.

INSTALLATION

Acceleration Switch Position Indicator:





CAUTION: The mercury switch (inside the acceleration switch), will not function properly if the switch is installed incorrectly. Verify that the switch locating arrow is pointing to the front of the vehicle.

1. Position switch on mounting bracket.
2. Install mounting bolts and tighten to 4-5 Nm (35-45 inch lbs.).
3. Connect harness to switch.
4. Place carpet back into position.