Loss of Ignition Run/Start (Active)

SYMPTOM
LOSS OF IGNITION RUN/START (ACTIVE)

WHEN MONITORED
Continuously with the ignition ON.

SET CONDITION
With ignition ON, the ignition run/start circuit voltage is other than expected.

POSSIBLE CAUSES
- Active code present only with PAB ON/OFF SW OFF
- Ignition switch output Run/Start open
- Fuse # 9 defective
- ACM defective, fused ignition Run/Start open
- Fused IGN switch output B/S CKT shorted to GND
- Fused IGN switch output Run/Start shorted to GND
- Fused ignition switch output Run/Start open
- (1) PAB ON/OFF switch defective
- ACM defective, Fused ignition switch shorted