PAB On/Off Switch Fails to Illuminate In Off Position

SYMPTOM
PAB ON/OFF SW FAILS TO ILLUMINATE IN OFF POSITION

POSSIBLE CAUSES
- Ignition switch output Run/Start open
- Fuse # 9 defective
- ACM defective, fused ignition Run/Start open
- Fused IGN switch output Run/Start CKT shorted to GND
- Fused IGN switch output Run/Start shorted to GND
- Fused ignition switch output Run/Start open
- (1) PAB ON/OFF switch defective
- ACM defective, fused ignition switch shorted
- Open fused ignition Run/Start circuit
- PAB ON/OFF switch ground circuit open
- Passenger airbag ON/OFF switch open