Instrument Panel Accessory Switch Bezel Replacement

WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIRBAG AND SEAT BELTS/AIR BAGS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the center bezel from the instrument panel. Instrument Panel Center Bezel Replacement

Instrument Panel Accessory Switch Bezel Remove/Install:

3. Remove the four screws that secure the accessory switch bezel to the instrument panel.
4. Pull the accessory switch bezel away from the instrument panel far enough to access the instrument panel wire harness connectors.
5. Disconnect the instrument panel wire harness connectors from the connector receptacles, the accessory switches and the cigar lighter/power outlet on the back of the accessory switch bezel.
6. Remove the accessory switch bezel from the instrument panel.

INSTALLATION
1. Position the accessory switch bezel to the instrument panel.
2. Reconnect the instrument panel wire harness connectors to the connector receptacles, the accessory switches and the cigar lighter/power outlet on the back of the accessory switch bezel.
3. Position the accessory switch bezel onto the instrument panel.
4. Install and tighten the four screws that secure the accessory switch bezel to the instrument panel. Tighten the screws to 2.2 Nm (20 in. lbs.).
5. Install the center bezel onto the instrument panel. Instrument Panel Center Bezel Replacement
6. Reconnect the battery negative cable.