Headlamp: Service and Repair

REMOVAL

Headlamp Bezel:

1. Remove the screws that attach the headlamp bezel.

Headlamp Retaining Ring:

2. Remove the screws that attach the headlamp retaining ring.

Headlamp Connector:

3. Disconnect the headlamp wire harness connector and remove the bulb from the bucket.

INSTALLATION
1. Connect the wire harness connector and position the bulb in the bucket.
2. Position retaining ring on the headlamp bulb and install screws.
3. Install the headlamp bezel. Tighten the screws securely.