PROM - Programmable Read Only Memory: Technical Service Bulletins

• Customer Interest
  • I/M Testing - OBDII CARB Readiness Monitor Information
    • Overview
    • Repair Procedure
  • Engine Idle Undershoot/Driveway Die Out
  • PCM - Cold Engine Start/Partial Cool Down Sag
  • PCM - Engine Sag When A/C Compressor Cycles
  • PCM - Idle RPM Undershoot/Overshoot
  • PCM - High Idle RPM On Deceleration
  • PCM - Addition of A Clear Flood Feature
  • PCM - Start and Stall, Idle Undershoot/Lost IAC Steps
  • PCM - False Mil ON, DTC P0443 Set
  • PCM - Erroneous Engine Misfire
• All Technical Service Bulletins
  • Engine Controls - Flash Programming Failure Recovery
    • Overview
    • Connected/Disconnected Flash Mode Using TechCONNECT
    • Pay Attention While Performing Flash Reprogram Procedures
    • Error Messages
    • Enhanced and Original Abort Recovery
    • Enhanced Abort Recovery Screens
    • Original Abort Recovery Screen
    • Programmable Modules
    • Powertrain Modules - Engine and Transmission
  • I/M Testing - OBDII CARB Readiness Monitor Information
    • Overview
    • Repair Procedure
  • Engine Idle Undershoot/Driveway Die Out
  • PCM - Cold Engine Start/Partial Cool Down Sag
  • PCM - Engine Sag When A/C Compressor Cycles
  • PCM - Idle RPM Undershoot/Overshoot
  • PCM - High Idle RPM On Deceleration
  • PCM - Addition of A Clear Flood Feature
  • PCM - Start and Stall, Idle Undershoot/Lost IAC Steps
  • PCM - False Mil ON, DTC P0443 Set
  • PCM - Erroneous Engine Misfire