194 RBI Axle

Mechanical Specifications

Axle Ratio 3.07,3.55,3.73,4.10
Differential Bearing Preload 0.1 mm (0.004 in.)
Differential Side Gear Clearance 0-0.15 mm (0-0.006 in.)
Ring Gear Diameter 19.2 cm (7.562 in.)
Ring Gear Backlash 0-0.15 mm (0.005-0.008 in.)
Pinion Std. Depth 92.08 mm (3.625 in.)
Pinion Bearing Rotating Torque
Original Bearings 1-2 Nm (10-20 in.lbs.)
New Bearings 1.5-4 Nm (15-35 in.lbs.)
Maximum Carrier Spread 0.51 mm (0.020 in.)

Torque Specifications

Differential Cover Bolt 41 Nm (30 ft.lbs.)
Differential Bearing Cap Bolt 77 Nm (57 ft.lbs.)
Ring Gear Bolt 95-122 Nm (70-90 ft.lbs.)
Nut, Pinion Gear-Minimum 271-474 Nm (200-350 ft.lbs.)
Screw, Pinion Mate Shaft Lock 16.25 Nm (12 ft.lbs.)
Bolt, ABS Sensor 8 Nm (70 in.lbs.)