Semi-Synchronized Reverse Idler gear
DISASSEMBLYFig. 115:
1. Remove snap-ring holding the reverse idler gear onto the reverse idler gear hub/race (Fig. 115).
Fig. 116:
2. Remove the plate washer from the reverse idler gear hub/race (Fig. 116).
Fig. 117:
3. Remove the reverse idler gear from the reverse idler gear hub/race (Fig. 117).
Fig. 118:
4. Remove the reverse idler gear synchronizer ring from the reverse idler gear hub/race (Fig. 118).
ASSEMBLY
1. Install the reverse idler gear synchronizer ring onto the reverse idler gear hub/race. Apply a film of 75W-90 GL-3 transmission oil to the contact surface of the synchronizer ring prior to assembly.
2. Install the reverse idler gear onto the reverse idler gear hub/race. Apply a film of 75W-90 GL-3 transmission oil to the reverse idler gear bushing prior to assembly. Verify that the teeth on the synchronizer ring are properly engaged into the recesses of the reverse idler gear.
3. Install the plate washer over the reverse idler gear hub/race and onto the reverse idler gear.
4. Install the snap-ring to hold the reverse idler gear onto the reverse idler hub/race.