P0705

Test 1 Through 8:

Test 9 Through 12:

Test 13 Through 17:

Test 18 Through 23:

Test 24 Through 27:

Test 28 Through 32:

Symptom:
P0705 CHECK SHIFTER SIGNAL

When Monitored and Set Condition:
P0705 CHECK SHIFTER SIGNAL

When Monitored:
Continuously.

Set Condition:
No signals are received or two signals are received from the Transmission Range Sensor by the TCM.

POSSIBLE CAUSES:
SHIFT LEVER POSITION CIRCUIT WIRING DAMAGED
TCM RANGE SWITCH CKT DEFECTIVE
TRS CIRCUIT ON TCM DEFECTIVE
TRS OD SENSE CKT ON TCM DEFECTIVE
TRS SENSE CKT AT TCM INOPERATIVE
TRS 1-2 SENSE CIRCUIT ON TCM DEFECTIVE
TRS 3 SENSE CIRCUIT ON TCM DEFECTIVE
TRS REVERSE SENSE CIRCUIT ON TCM DEFECTIVE
TRS SENSE CKT ON TCM DEFECTIVE
FUSED IGNITION SWITCH OUTPUT OPEN AT TRS CONNECTOR
TRS 1-2 SENSE CIRCUIT OPEN
TRS 3 SENSE CIRCUIT OPEN
TRS IN 1-2 IS OPEN
TRS IN 3RD IS OPEN
TRS IN OD IS OPEN
TRS INTERNAL FAILURE
TRS INTERNAL FAULT
TRS OD SENSE CIRCUIT OPEN
TRS OPEN IN REVERSE
TRS REVERSE SENSE CIRCUIT OPEN
TRS SENSE CIRCUIT OPEN
TRS SENSE CIRCUIT SHORT TO GROUND
TRS SENSE CIRCUIT SHORT TO VOLTAGE
TRS SENSE CIRCUIT SHORT TO VOLTAGE
TRS STUCK IN ON POSITION