Spacer Blocks

SPACER BLOCKS

REMOVAL

Fig. 10:

1. Upper spacer block: drill-out the rivet heads and remove them from the reinforcement plate (Fig. 10).

Fig. 11:

2. Lower spacer block: remove the screws from the door face (Fig. 11).
3. As applicable, remove the spacer block from the door window frame or door face.

INSTALLATION

1. As applicable, position the spacer block on the door window frame or door face.
2. Upper spacer block: Install the replacement rivets in the spacer block and reinforcement plate.
3. Lower spacer block: install the screws in the door face. Tighten the screws to 1 N.m (11 in.lbs) torque.