Trunk / Liftgate Hinge: Service and Repair

HINGE

REMOVAL

It is not necessary to remove the liftgate to replace one or both hinges.
1. Open and support the liftgate.
2. Remove the liftgate opening upper trim.

Fig. 3:

3. Remove the bolts attaching the hinge to the header panel (Fig. 3).
4. Remove the bolts attaching the hinge to the liftgate.

INSTALLATION

1. Position the hinge on the liftgate.
2. Install the bolts attaching the hinge to the liftgate. Tighten to 26 N.m (19 ft.lbs.) torque.
3. Install the bolts attaching the hinge to the header panel. Tighten to 26 N.m (19 ft.lbs.) torque.
4. Install the liftgate opening upper trim.
5. Remove the support and close the liftgate.