B-Pillar Trim

B-PILLAR TRIM

REMOVAL

1. Remove the inner scuff plate.

Fig. 2:

2. Remove the upper door opening trim (4-door vehicles) (Fig. 2).

Fig. 1:

3. Remove the upper quarter panel trim (2-door vehicles) (Fig. 1).
4. Remove the rear A-pillar trim screw.
5. Remove the shoulder belt turning loop.
6. Remove the seat shoulder belt anchor bolt.
7. Remove the screws attaching the B-pillar trim to the B-pillar (2-door vehicles).
8. Route the shoulder belt through the lower B-pillar trim (2-door vehicles).
9. Separate the B-pillar trim from the B-pillar.

INSTALLATION

1. Route the shoulder belt through the lower B-pillar trim (2-door vehicles).
2. Position the B-pillar trim on the B-pillar and align push-in fasteners.
3. Press the B-pillar trim on the B-pillar to secure.
4. Install the screws attaching the B-pillar trim to the B-pillar (2-door vehicles).
5. Install the seat/shoulder belt anchor bolt.
6. Install the shoulder belt turning loop.
7. Install the A-pillar trim.
8. Install the upper quarter panel trim (2-door vehicles) (Fig. 1).
9. Install the upper door opening trim (4-door vehicles) (Fig. 2).
10. Install the inner scuff plate.