Loss of Ignition Run/Start (Stored)

Test 1:

SYMPTOM
LOSS OF IGNITION RUN-START - STORED

TEST NOTE
This symptom is diagnosed using the test DRIVER SQUIB CIRCUIT OPEN - STORED.

WHEN MONITORED
With the ignition in the run/start position the ACM monitors the Fused Ignition Switch Output Run/Start circuit for proper system voltage.

SET CONDITION
If the voltage on the Fused Ignition Switch Output Run/Start circuit drops below 4.5 volts, the code will set.

POSSIBLE CAUSES
- Active or stored code present
- Stored code or intermittent condition