Door

DOOR

REMOVAL

1. Remove door restraint (check) retaining pin.
2. For vehicles equipped with power windows, power mirrors and power door locks, remove trim panel and waterdam. Disconnect all components and route wire harness out of door.

Fig. 4:

3. Remove bolts that attach hinge to door (Fig. 4).
4. Remove door from vehicle.

INSTALLATION

1. Position door in body opening.
2. Align door hinges, plates and shims and install bolts. Tighten bolts to 3 N.m (2 ft.lbs.) torque.
3. Install door restraint (check) pin.
4. If applicable, route and connect wire harness connectors.
5. Install door waterdam and trim panel.