Seat

SEAT

REMOVAL

Fig. 8:

1. Remove bolts attaching seat to floor pan (Fig. 8).
2. Remove nut attaching seat to floor pan.
3. For power seat, disconnect wire harness connector. If equipped, disconnect wire harness for heated seat.
4. Disconnect seat belt buckle warning wire harness connector.
5. Separate seat from floor panel.

INSTALLATION

1. Position seat on floor pan.
2. Connect seat belt buckle warning wire harness connector.
3. For power seats, connect wire harness connector. If equipped, connect harness for heated seat.
4. Install front fasteners attaching seat to floor pan. Tighten to 27 N.m (20 ft.lbs.) torque.
5. Install rear fasteners attaching seat to floor pan. Tighten to 27 N.m (20 ft.lbs.) torque.
6. Install nut attaching seat to floor pan. Tighten to 40 N.m (30 ft.lbs.) torque.