Seat Back Cushion / Cover

SEAT BACK CUSHION / COVER

REMOVAL

1. Remove seat from vehicle.
2. Remove side shield trim cover.
3. Remove seatback.
4. With the cushion side down, disengage the forward, rearward and inboard J-straps.
5. Disengage the clips attaching the outboard side of the cover to the cushion frame.
6. Turn the cushion over and roll the cover off the cushion.
7. Disengage the electrical connectors for the heated seat, if equipped.

Fig. 14:

8. Remove the hog rings attaching the cover to the cushion support wires (Fig. 14).
9. Separate the cover from the cushion.

INSTALLATION

1. Position the cover on the cushion.
2. Engage the electrical connectors for the heated seat, if equipped.
3. Install the hog rings attaching the cover to the cushion support wires.
4. With the cushion side down, engage the forward, rearward and inboard J-straps.
5. Engage the clips attaching the outboard side of the cover to the cushion frame.
6. Install seatback.
7. Install side shield trim cover.
8. Install seat.