Seat Track

SEAT TRACK

REMOVAL

NOTE: If the vehicle is equipped with manually adjusted bucket seats, the inboard or outboard seat track may be serviced separately.

1. Remove bucket seat from vehicle.
2. Remove screws attaching the side shield trim cover from the seat.
3. If equipped, disengage the power seat connector from the power seat switch.
4. Remove the nuts attaching the seat track to the bucket seat platform.
5. When separating the seat track from the platform, route the power seat switch connector through the access hole in the seat cushion frame, if equipped.

INSTALLATION

1. While positioning the seat track on the bucket seat platform, route the power seat switch connector through the access hole in the seat cushion frame, if equipped.
2. Install the nuts attaching the seat track to the bucket seat platform.
3. If equipped, engage the power seat connector to the power seat switch.
4. Install screws attaching the side shield trim cover to the seat.
5. Install bucket seat.