Tail Lamp: Service and Repair
REMOVAL1. Open the liftgate.
Fig.33 Tail Lamp:
2. Remove the screws that secure the tail lamp unit to the quarter panel (Fig. 33).
3. Grasp the tail lamp unit and pull it rearward to disengage it from the grommet at the base of the lamp.
4. Rotate the bulb sockets counterclockwise and remove the sockets from the tail lamp housing.
5. Remove the tail lamp unit from the quarter panel.
INSTALLATION
1. Position the tail lamp unit to the quarter panel.
2. Insert the bulb sockets in to the tail lamp housing and rotate the sockets clockwise.
3. Position the tail lamp unit the quarter panel and push forward to engage the grommet.
4. Install the screws that secure the tail lamp unit to the quarter panel.
5. Close the liftgate.