Wiper and Washer Systems: Locations

The washer fluid level switch is located in a dedicated hole near the center of the forward surface of the washer reservoir, ahead of the left front wheel housing.

The washer reservoir filler neck is located on the left inner fender shield, above the left front wheel housing in the engine compartment.

The two front washer nozzles are secured with rivets within raised pocket formations in the cowl plenum cover/grille panel located near the base of the windshield.

The front washer pump/motor unit is located on the outboard side and near the front of the washer reservoir, between the left front inner and outer fender panels.

The front wiper arms are the rigid members located between the wiper pivots that protrude from the cowl plenum cover/grille panel near the base of the windshield and the wiper blades on the windshield glass.

The rear washer pump/motor unit is located in a dedicated hole on the lower outboard side of the washer reservoir, ahead of the left front wheel housing.

The rear washer pump/motor unit is located on the outboard side and near the front of the washer reservoir, between the left front inner and outer fender panels.

The rear wiper arm is the rigid member located between the rear wiper motor output shaft that protrudes from the outer liftgate panel near the base of the liftgate glass opening and the wiper blade on the liftgate glass.

The rear wiper and washer switch is located in the accessory switch bezel near the bottom of the instrument panel center stack area on the instrument panel.