Rearview Mirror

REAR VIEW MIRROR

REMOVAL

Fig. 4:

1. Disconnect the electrical connector, if equipped. (Fig. 4)
2. Loosen the mirror set screw.
3. Slide the mirror up and off the support button (bracket).

INSTALLATION

1. Slide the mirror onto the support button (bracket).

CAUTION: Do not over-tighten the setscrew because glass chipping and/or breakage could result.

2. Tighten the mirror set screw to 1 N.m (9 in.lbs.).
3. Connect the electrical connector, if equipped.