Rear Seat Back Cover
REAR SEAT BACK COVERREMOVAL
1. Remove the seat.
Fig. 18:
2. Remove the screws and remove the seat back release handle bezel. (Fig. 18)
3. Release the j-clips at the bottom of the seat back and remove the seat cover.
Fig. 19:
4. Remove the hog rings and remove the seat cushion. (Fig. 19)
INSTALLATION
1. Position the cushion onto the seat back frame and install new hog ring fasteners.
2. Install the cover over the seat back frame and cushion.
3. Connect the bottom j-clips.
4. Install the release handle bezel and install the screws.
5. Install the rear seat back.