Rear Seat Back Hinge
REAR SEAT BACK HINGEREMOVAL
1. Remove the seat.
Fig. 16:
2. Remove the lower hinge bolts. (Fig. 16)
3. Disconnect the lower j-straps of the seat back and position aside the seat back cover.
Fig. 17:
4. Disconnect the release cable. (Fig. 17)
5. Remove the bolts and remove the hinge.
INSTALLATION
1. Install the hinge and install the bolts.
2. Tighten the bolts to 50 N.m (37 ft.lbs.).
3. Connect the release cable.
4. Connect the lower j-straps of the seat back.
5. Install the lower hinge bolts and tighten to 50 N.m (37 ft.lbs.).
6. Install the seat.