Door Opening Frame
DOOR OPENING FRAMEREMOVAL
Vehicles equipped with a soft top require a door opening frame to complete the seal for the soft top door assembly.
1. Lower the top to the rearward position.
Fig. 8:
2. Turn the knobs located on top of the door opening frame counter clockwise and remove completely (Fig. 8).
3. Pull door opening frame outward and up. Separate from vehicle.
INSTALLATION
Vehicles equipped with a soft top require a door opening frame to complete the seal for the soft top door assembly.
1. Install the alignment pin at the base of the door opening frame into the hole at the top of the quarter panel.
2. Position the door opening frame on the side support bar and install the knobs.
3. Raise and secure the top.