Front Seat Back Recliner / Cover
FRONT SEAT BACK RECLINER / COVERREMOVAL
1. Remove the seat.
2. Disconnect the j-straps at the lower edge of the seat back and position aside.
3. Disconnect the rear j-straps of the cushion and position aside.
Fig. 3:
4. Using a small flat bladed tool, release the recliner cover retaining tab and remove. (Fig. 3)
Fig. 4:
5. Disconnect the seat back dump cables. (Fig. 4)
6. Remove the two seat back bolts.
7. Remove the two seat cushion frame bolts.
8. Disconnect the recliner cable.
9. For the inboard recliner, disconnect the forward folding cable assembly, if equipped.
INSTALLATION
1. Connect the forward folding cable assembly, if equipped.
2. Connect the recliner cable.
3. Install the two seat cushion frame bolts.
4. Install the two seat back bolts.
5. Connect the seat back dump cables.
6. Install the recliner cover.
7. Connect the rear j-straps of the cushion.
8. Connect the j-straps at the lower edge of the seat back.
9. Install the seat.