Rear Seat Release Cable
REAR SEAT RELEASE CABLEREMOVAL
1. Remove the seat.
Fig. 18:
2. Remove the screws and remove the seat back release handle bezel. (Fig. 18)
3. Release the j-clips at the bottom of the seat back and remove the seat cover.
Fig. 17:
4. Disconnect the cables at the seat back hinges. (Fig. 17)
Fig. 22:
5. Position the seat back cushion aside and remove the screws. (Fig. 22)
6. Remove the seat back release cable assembly.
INSTALLATION
1. Install the seat back release cable assembly and install the screws.
2. Connect the cables at the seat back hinges.
3. Install the seat cover and engage the j-clips at the bottom of the seat back.
4. Install the handle bezel and install the screws.
5. Install the seat.