Rear Check Valve Replacement

Rear Check Valve Replacement
REMOVAL
1. Disconnect the hardtop half of the washer supply hose from the barbed nipple of the rear check valve.
2. Disconnect the body half of the washer supply hose from the other barbed nipple of the rear check valve.
3. Remove the rear check valve from the left rear corner of the vehicle near the belt line.

INSTALLATION
1. Position the rear check valve into the left rear corner of the vehicle near the belt line.

Fig.3 Rear Check Valve:

2. With the tapered end of the check valve pointed in the direction of the system flow, reconnect the body half of the washer supply hose to the barbed nipple of the rear check valve.
3. Reconnect the hardtop half of the washer supply hose to the other barbed nipple of the rear check valve.