Rear Seat Cushion Cover

REAR SEAT CUSHION COVER

REMOVAL

1. Remove the rear seat back.

Fig. 20:

2. Un-zip the cover. (Fig. 20)

Fig. 21:

3. Release the J-clips. (Fig. 21)
4. Roll the cover from seat cushion and separate from the seat cushion frame.
5. Remove the hog rings from the foam to cover.

INSTALLATION

1. Position the cover on the cushion, install new hog rings to foam, and roll cover downward over the corners.
2. Connect the J-clips to the seat cushion frame.
3. Close the cover zipper and tuck the zipper ends into the cover.
4. Install the rear seat back.