Odometer/Trip Odometer

ODOMETER/TRIP ODOMETER
The VF odometer illuminates after the ignition is turned on. The total and trip odometers use a common display. A trip reset button is used to toggle between the total and trip display modes. The trip odometer will roll over at 9999.9. The maximum value for the total odometer is 999999.9 miles/Km. The total odometer will not roll over but will remain latched at the maximum value.

Trip Select Button
* If the trip reset button is held for approximately 1 (one) second, the cluster will toggle between the total and trip odometers.
* Holding the trip reset button for approximately 2 (two) seconds or more, the cluster will reset the trip odometer.
* Holding the trip reset button while turning the ignition to the Run/Start position will cause the cluster to enter the self-test diagnostics. Refer to the Self Test Description.

Odometer On With Door Ajar
* The VF display will illuminate when the cluster receives a Driver or Passenger door ajar input with the key off, 0 (zero) MPH, and 0 (zero) RPM.
* The cluster will display the last function of the odometer, either total or trip.
* This feature will timeout after 20 (twenty) minutes.